Progress Lighting P8617-31 Bedienerhandbuch Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
Well Light (P5295)
Remove from carton. Select mounting location and remove dirt, mulch or deck material so fixture is well seated and will
maintain the aiming position you select. Fixture lip should remain above grade. Attach fixture connector (included) to the
main low-voltage cable.
Floodlight (P5299)
Remove from carton. Select spike or deck mount and attach with wing-nut. If deck mounting on a flat surface, secure the
adapter to mounting surface. If spike mounting, press into dirt or mulch while holding the spike. Do not push from head
as damage can occur. Loosen wing-nut to adjust aiming and re-tighten to lock in place. Attach fixture connector
(included) to the main low-voltage cable.
Deck Light (P5296)
Remove from carton. Remove two cover screws, cover, and lens and align at desired mounting location. Two mounting
screws are provided for typical mounting. Securely mount taking care not to damage the LED light source. Replace lens
and cover. Attach fixture connector (included) to the main low-voltage cable.
Path Light Shell (P5225)
A versatile path light with adjustment of the head from full cutoff (horizontal) to 45 degree up-tilt for flood affect. Carefully
remove from carton protecting head assembly. Slip staff into head fitter and tighten set screw. Tighten knuckle screw to
prevent movement while mounting. Select spike or deck adapter mounting. Mount as desired. Loosen the knuckle screw
to adjust tilt and re-tighten. Attach fixture connector (included) to the main low-voltage cable.
Path Lights
Carefully remove from carton protecting head assembly. Connect staff to head by carefully threading
or slipping the staff in place. Select spike or deck adapter mounting. If deck mounting on a flat surface,
secure the adapter to mounting surface, insert fixture staff, and tighten set screw. If spike mounting,
insert staff into spike and tighten set screw. When locating the spike fixture, press into dirt or mulch
while holding the spike. Do not push from head or staff as damage can occur. Attach fixture connector
(included) to the main low-voltage cable.
P5297 P5298
93033064 (12/01/10)
Seitenansicht 1
1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare